The Differences Among FLIPSKY 75100 75200 Series ESC

With the launching of FSESC75100 pro V2.0 and FSESC75200 pro V2.0, some customers are confused of the features of these escs.
Here below the details FYI.
75100
(75V 100A)
75100
with Alu.Case
75100
 Pro
75100
V2.0
75100 pro V2.0
Firmware 5.02 5.02 5.02 5.02 6.02
Continuous Current(a) 80A 100A 100A 100A 100A
Peak Current(a) 150A 250A 250A 250A 250A
Voltage(v) 14-84V
(4-20S)
14-84V
(4-20S)
14-84V
(4-20S)
14-84V
(4-20S)
14-84V
(4-20S)
Bulit with BT Module No No Yes No Yes
Programmable Yes Yes Yes Yes Yes
Regenerative Capacity Yes Yes Yes Yes Yes
Power ON/OFF switch No No No Yes Yes
Phase Filter No No No No Yes
Motor Wire 12awg 12awg 10awg 12awg 10awg
Power Wire 12awg 12awg 10awg 12awg 10awg
75200
with Alu.Case
75200 Pro 75200 Pro V2.0
Firmware 5.02 5.02 6.02
Continuous Current(a) 200A 50V/200A
75V/150A
50V/200A;
75V/150A
Peak Current(a) 400A 400A 400A
Voltage(v) 14-75V
(3-16S)
14-84V
(4-20S)
14-84V
(4-20S)
Bulit with BT Module NO Yes Yes
Programmable Yes Yes Yes
Regenerative Capacity Yes Yes Yes
Power ON/OFF switch NO NO Yes
Phase Filter NO NO Yes
Motor Wire 8awg 8awg 8awg
Power Wire 10awg 8awg 8awg

The escs are changing per customers needs by increasing workable voltage, current, adding power on/off switch and intergrating bluetooth module etc.. More ideas or suggestions are much appreciated to fulfill customers needs. Thank you for all your great support.
 

Leave a comment

Please note, comments must be approved before they are published