flipsky_esc_tool  software and manual download link

Note: USB cable black or white will be shipped randomly.

Specifications : 

• Firmware: V1.2 (firmware update via Flipsky ESC Tool supported)
• Voltage: 14-84V (safe for 4S-20S)
• Continuous Current: 100A / Single; 200A / Dual (values depend on the mounting  and ambient temperature around the device!)
• Peak Current: 250A / Single; 500A / Dual
• Communication Ports: USB, CAN, UART, PPM, ADC
• Input Signals Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present)
• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored)
• BEC: 5V@1A
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Front Lights, Rear Brake Lights & Horn: Support
• Programmable: Yes
• Regenerative Capacity: Yes
• Slide Poweron & Auto shutdown: Yes
• Self-resetting switch with green LED button Diameter: 16mm
• Power Wire Size: 10AWG; Motor Wire Size: 12 AWG
• Size: L132*W81*H26.5mm(Including Alu. Case)

Features:

1.Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
2.240MHz and the max PWM switching frequency 45KHz improves the motor RPM.
3.Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways.
4.Programmable via Flipsky remote controller VX4 (remote firmware version: VX4_V1.2.1 or above).
5.Supporting motor FOC with low working noise and smooth starting.
6.Supporting Real-time data and fault alerts.
7.Supporting adaptive variable PWM frequency control.
8.Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).
9.Supporting control types: Current, Duty Cycle
10.Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.
11.Integrated smart switch function: supports sliding poweron and automatic shutdown function; automatic shutdown time is adjustable via ESC TOOL.
12.Supporting extra interface like front lights, rear brake lights and horn fixtures.

Wiring diagram:

flipsky_esc_tool  software and manual download link

Note: USB cable black or white will be shipped randomly.

Specs:

• Firmware: V1.0, supporting update via Flipsky ESC Tool
• Voltage: 14-84V(safe for 4-20S)
• Continuous current: 50V/60A; 75V/50A; 84V/40A (Values depend on the mounting, ambient
• temperature and air/water circulation around the device!); Peak Current: 250A
• Communication Ports: USB, CAN, UART
• Input Signal Support: PPM, UART(compatible with FLIPSKY remote VX4 only), ADC
• BEC: 5V@1A
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Motor/power wire size: 12 AWG
• Programmable: Yes
• Regenerative Capacity: Yes
• Size: L110.5*W55*H30mm(Including Alu. Case)

Features:

• Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed
• 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
• Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery
• voltages and many control ways.
• Programmable via Flipsky VX4 remote(Firmware Version:VX4_V1.2)
• Supporting FOC with low working noise and smooth starting.
• Supporting Real-time data and fault alerts.
• Supporting adaptive variable PWM frequency control.
• Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).
• Supporting control types: Current, Duty Cycle
• Protection functions: low and high voltage protection, over-current protection, temperature
• abnormally protection, mosfets over-temperature and over current protection, battery over
• discharge protecting, motor over-temperature protection.

flipsky_esc_tool  software and manual download link

Note: USB cable black or white will be shipped randomly.

Spec:

• Firmware supporting update via Flipsky ESC Tool
• Voltage: 14-84V(safe for 4-20S)
• Continuous current: 50V/60A; 75V/50A; 84V/40A (Values depend on the mounting, ambient temperature and air/water circulation around the device!)
• Peak Current: 250A
• Communication Ports: USB, CAN, UART
• Input Signal Support: PPM, UART(compatible with FLIPSKY remote VX4 only), ADC
• BEC: 5V@1A
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Motor/power wire size: 12 AWG
• Programmable: Yes
• Regenerative Capacity: Yes
• Size: L110.5*W55*H30mm(Including Alu. Case)
• Power Switch Button: Red

Features:

• Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed
• 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
• Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways.
• Programmable via Flipsky VX4 remote(Firmware Version:VX4_V1.2)
• Supporting FOC with low working noise and smooth starting.
• Supporting Real-time data and fault alerts.
• Supporting adaptive variable PWM frequency control.
• Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).
• Supporting control types: Current, Duty Cycle
• Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.

Application Fields:

Electric skateboard / Ebike / E-Scooter / Electric Motorc ycle / Robotics / FPV / RC Toys /Boat / Kayak etc

flipsky_esc_tool  software and manual download link

Spec:

• Firmware: V1.3 or above (firmware update via Flipsky ESC Tool supported)
• Voltage: 14V-84V (safe for 4S-20S)
• Continuous current: 50V/550A; 75V/450A (Values depend on the mounting, ambient temperature
• and air/water circulation around the device!);
• Peak Current: 1000A
• BEC:5V@1A
• Motor/power Wire Size:8 AWG (3pcs combine)
• Programmable Tool: Flipsky ESC TOOL
• PWM Frequency Control: YES
• Multiple Speed Gear Limit Control:YES (UART / ADC)
• Regenerative Capacity: Yes
• Communication Ports: USB, CAN, UART, PPM, ADC
• Input Signal Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro
• only at present, it will be compatible with more remote controllers soon)
• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored)
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Switch Support: Power on/off button switch or key switch
• Size: L227.5*W140*H54mm(with water cooling enclosure)

Features:

1. Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
2. 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
3. Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different
4. batteries voltages and many control ways.
5. Programmable via Flipsky VX4 remote (Firmware Version:VX4_V1.2.1or above)
6. Supporting FOC with low working noise and smooth starting.
7. Supporting Real-time data and fault alerts.
8. Supporting adaptive variable PWM frequency control.
9. Supporting sensor mode(HALL) and sensorless modes (IPDS, HFPI).
10. Supporting control types: Current, Duty Cycle.
11. Protection functions: low and high voltage protection, motor over-temperature protection (suitable
12. for NTC-10K-25℃ temperature sensing resistance only), battery over discharge protecting,
13. mosfets over current and over-temperature protection.