Flipsky Inrunner Brushless DC 65111 Motor 160KV 3000W for Surfing Boat Underwater Thruster |Hydro | Efoil
Regular price
Sale price$190.00
-102 in stock
Spec:
Voltage range: 6-20S (25.2-84V)
Max power: 3000W; Continuous power: 1500W
Peak current: 70A; Continuous current: 30A
Motor KV: 160KV
Max spin speed(RPM): 8064
Size: OD65*L111mm
Shaft diameter: 10mm
Motor pole: 6pcs; 3 pairs
Motor stator slot: 12
Waterproof rate: IP68
Lead wires extension: 12AWGx1400mm
The thrust under the condition of reaching this voltage and current as below:
48.5V 2.7A 5KG
48.5V 8.2A 10KG
48.5V 18.2A 15KG
48.5V 20A 17KG
48.5V 25A 19KG
48.5V 30A 21KG
48.5V 35A 23KG
Drawing:
F5085 140KV 650W brushless motor for Direct Drive Propeller/Efoil
Regular price
Sale price$116.00
-54 in stock
Remark: This product will not come with cable .
Features:
Type: Underwater Propeller Motor
Motor dimension: 50*85mm
Waterproof level:IP28 grade waterproof
Poles:28(please write 14 pairs when do setup)
Max torque:1.5NM
Weight:1.51b/0.68kg
Rerference information:
F4125 300KV 410W brushless motor for Direct Drive Propeller/Efoil
Regular price$63.00
-44 in stock
Features:
Waterproof level:IP28 grade,it can work underwater.
Material :316 stainless steel shaft
Spec:
Maximum power:410W
Motor diameter: 46mm
Motor length: 50mm
Mounting distance: 28mm
Shaft diameter: 4.85mm
Poles:28(please write 14 pairs when do setup)
Torque: 0.9N.m
Prop mounting distance: 25mm
Weight:310g
What is the advantage of F4125:
Anti-corrosion, can be used in sea water.
IP28 grade waterproof, It can work underwater.
Flipsky FSESC 75300 84V High Current 350A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot Surfboard AGV Robot
Regular price$248.00
-47 in stock
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Spec:
Firmware: 5.2, supports firmware upgrade
Voltage:14-84V( safe for 3-20S)
Continuous Current : 50V/300A,75V/200A
Max Current :350A
Supported sensors: ABI, HALL, AS5047,AS5048A
EPRM:150000
Phase filter: Yes
Size:178*100*45mm((Including the height of water pipes and electrolytic capacitors)
Feature:
Regenerative braking
The CPU adopts the 32F405 with the main frequency of 168MHz and the Cortex-M4 architecture with DSP function;
Sensored or sensorless operation + hybrid mode
Configurable RPM-, current-, voltage- and power limits
Input source: PPM, ADC, NRF,UART,PAS
Communication ports: USB, CAN, UART,SPI,IIC
Throttle curve and ramping for all input sources
Seamless 4-quadrant operation
Motor revolution, ampere hour, watt hour counting
Real-time data analysis and readout through the communication port.
Adjustable protection against:
Low input voltage
High input voltage
High motor current
High input current
High regenerative braking current (separate limits for the motor and the input)
High RPM (separate limits for each direction)
Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate
Motor wire: 8AWG
Power cable: 8AWG
Waterproof level(with water cooling enclosure):IP67
Flipsky FSESC 75200 75V High Current 200A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot Surfboard AGV Robot
Regular price
Sale price$285.00
-60 in stock
Spec:
Firmware: 6.02 (firmware update supported)
Voltage:14-75V( safe for 3-16S)
Continuous Current : 200A
Max Current :300A
Supported sensors: ABI, HALL, AS5047,AS5048A
EPRM:150000
Phase filter: No
Feature:
Regenerative braking
Sensored or sensorless operation + hybrid mode
Configurable RPM-, current-, voltage- and power limits
Input source: PPM, Analog, NRF Nyko Kama Nunchuck
Communication ports: USB, CAN, UART
Throttle curve and ramping for all input sources
Seamless 4-quadrant operation
Motor revolution, ampere hour, watt hour counting
Real-time data analysis and readout through the communication port.
Adjustable protection against:
Low input voltage
High input voltage
High motor current
High input current
High regenerative braking current (separate limits for the motor and the input)
High RPM (separate limits for each direction)
Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate
Motor wire: 8AWG
Power cable: 10AWG
Waterproof level(with water cooling enclosure):IP67
Warm tips:
Phase filering is not available for Flipsky ESC75100 and 75200! Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Here below video and blog links FYI. YouTube:Click here Blog:Click here
Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
Be compatible with Flipsky FSESC and other VESC and Non-VESC
ESK8 mode / E-surf mode switching freely
Esurf mode:Cruise speed control function
Waterproof IP rating: IP67
Bigger remote battery capacity:1500MA
ESC failure report :Detect possible failures of the ESC in time for replacing
Controller mode: PPM/UART
Charging way:Wireless Magnetic Charging
VX3 Remote comes with Receiver
Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.
Wiring Diagram:
Reference video:
Flipsky 75200 84V High Current With Aluminum PCB Based on VESC For Fighting Robot Surfboard AGV Robot
Regular price
$176.00Sale price$150.00
-159 in stock
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Specs:
Firmware: 5.2, supports firmware upgrade
Voltage: 14-84V (safe for 4-20S)
Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
BEC: 5V@1A
Support Modes: DC, BLDC, FOC (sinusoidal)
ERPM: 150000
Communication Ports: USB, CAN, UART, SPI, IIC
Supported Sensors: ABI, HALL, AS5047, AS5048A
Input Source Support: PPM, ADC, NRF, UART
Supported Sensorless: Yes
Regenerative capacity: Yes
Programmable via VESC_TOOL: Yes
75200 Size:130x67.7x40.1mm(Including alu. case)
Motor/power wire size: 8 AWG
Features:
1.Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection. 2.Support various control modes: Current / Duty cycle / Speed / PID control modes. 3.Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160. 4.CPU:32F405 with frequency 168MHz 5.Aluminum PCB with good heat dissipation to expand life span. 6.Two COMM ports: UART bluetooth module, screen display or remote controller supportable.
Warm tips:
Phase filering is not available for Flipsky ESC75100 and 75200! Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Here below video and blog links FYI. YouTube:Click here Blog:Click here
Wiring diagram:
Group W7 Water Sports Kit (Includes High Current FSESC75300 /75200 and 65161 Motor)